HP Photosmart C8180 All-in-One Printer - Manual (Page 126)

• Normal delivers high quality and is the recommended setting for most of your
copying. Normal copies faster than Best and is the default setting.
• Fast copies faster than the Normal setting. The text is comparable to the quality of
the Normal setting, but the graphics might be lower quality. The Fast setting uses
less ink and extends the life of your ink cartridges.
To change the copy quality from the control panel
1. Make sure you have paper loaded in the input tray.
2. Load your original print side down on the right front corner of the glass.
3. Touch Copy.
The Copy Menu appears.
4. Touch Quality.
The Quality menu appears.
5. Touch the appropriate copy quality.
6. Touch Done.
Adjust the lightness and darkness of your copy
You can use the Lighter / Darker option to adjust the contrast of the copies you make.
To adjust the copy contrast from the control panel
1. Make sure you have paper loaded in the input tray.
2. Load your original print side down on the right front corner of the glass.
3. Touch Copy.
The Copy Menu appears.
4. Touch Lighter / Darker.
NOTE: If the menu option you want is not visible on the screen, touch or
to scroll through all the menu options.
The Lighter / Darker menu appears.
5. Do one of the following:
•
Touch to darken the copy.
• Touch to lighten the copy.
6. Touch Done.
Change default copy settings
When you change copy settings from the control panel, the settings apply only to the
current copy job. To apply copy settings to all future copy jobs, you can save the settings
as defaults.
To set default copy settings from the control panel
1. Touch Copy.
The Copy Menu appears.
2. Make any needed changes to the copy settings.
Change default copy settings 125
Co
py