HP Photosmart C8180 All-in-One Printer - Manual (Page 45)

NOTE: When manually entering an IP setting, you must already be connected to an
active network, otherwise the setting will not stay when you exit from the menu.
CAUTION: Be careful when manually assigning an IP address. If you enter an invalid
IP address during the installation, your network components will not be able to connect
with the HP All-in-One.
To change IP settings
1. Touch Setup on the display.
2. Touch Network.
NOTE: If the menu option you want is not visible on the screen, touch or
to scroll through all the menu options.
3. Touch Advanced Setup.
4. Touch IP Settings.
5. Touch Manual.
6. Touch one of the following IP settings.
•
IP Address
• Subnet Mask
• Default Gateway
7. Touch or to change the settings, and then touch OK to confirm the setting.
Related topics
• “View and print network settings” on page 41
• “Network configuration page definitions” on page 46
Use the Embedded Web Server
If your computer is connected to an HP All-in-One on a network, you can access the
Embedded Web Server that resides in the HP All-in-One. The Embedded Web Server is
a web-based user interface that provides some options not available on the HP All-in-
One control panel, including Webscan, a feature that lets you scan photos and documents
from the HP All-in-One to your computer using a Web browser, and advanced network
security options. Also, the Embedded Web Server enables you to monitor status and
order printer supplies.
For information on how to use the features available in the Embedded Web Server,
including Webscan, see the onscreen help within the Embedded Web Server. To access
Embedded Web Server help, open the Embedded Web Server, then click the Help link
under Other Links on the Embedded Web Server Home tab.
NOTE: Use the Embedded Web Server to change network settings not available on
the control panel.
This section contains the following topics:
• Access the Embedded Web Server
• Use the Embedded Web Server setup wizard
Chapter 4
44 Finish setting up the HP All-in-One
Finish set
up