Finish setting up the hp all-in-one, Set your preferences, Set your language and country/region – HP Photosmart C8180 All-in-One Printer User Manual

Page 20: 4 finish setting up the hp all-in-one, 4finish setting up the hp all-in- one

Advertising
background image

4

Finish setting up the HP All-in-

One

After you have completed the steps in your Setup Guide, refer to this section to help you
finish setting up the HP All-in-One. This section contains important setup-related
information for your device, including information on setting preferences.
This section contains the following topics:

Set your preferences

Computer connection information

Connect to a network

Set your preferences

You can change the settings on the HP All-in-One so that it behaves according to your
preference. For example, you can set general device preferences, such as the language
used to display messages. You can also restore the device settings to what they were
when you purchased your device. This will erase any new defaults you have set.

This section contains the following topics:

Set your language and country/region

Adjust the volume

Set the default paper tray for PictBridge/DPOF/uPnP printing

Enable faster browsing of photos

Set the paper tray for printing from a Bluetooth device

Restore the factory defaults

Play a slideshow on the display

Share CD/DVD drive

Set your language and country/region

The language setting determines which language the HP All-in-One uses to show
messages on the display. The country/region setting determines the default paper sizes
and layouts for printing. You can change these settings at any time by using the following
procedures.

To set the language

1.

Touch Setup on the display.

2.

Touch Preferences.

3.

Touch Set Language.

Finish setting up the HP All-in-One

19

Finish

set

up

Advertising