HP LaserJet M9040M9050 Multifunction Printer series - Manual (Page 102)

6. Close the tray. The MFP control panel might show the tray media type and size. If the configuration
is not correct, touch
Modify on the control panel. If the configuration is correct, touch OK .
Figure 6-9 Load trays 2, 3, and 4 (6 of 6)
Load undetectable standard-size paper in trays 2, 3, and 4
Follow this procedure to load undetectable standard-size paper in the tray. The following are the
undetectable sizes:
● 8K
● 16K
● Statement
● JIS Executive
● 8.5 x 13 (216 x 330 mm).
CAUTION: To avoid a jam, never add or remove paper from a tray while printing from that tray.
1. Open the tray until it stops.
Figure 6-10 Load undetectable standard-size paper in trays 2, 3, and 4 (1 of 6)
2. Press the tab on the front paper guide and slide the guide all the way out.
3. Press the tab on the left paper guide and slide the guide all the way out.
4. Load (orient) the paper according to size.
Figure 6-11 Load undetectable standard-size paper in trays 2, 3, and 4 (2 of 6)
88 Chapter 6 Paper and print media ENWW