HP LaserJet M9040M9050 Multifunction Printer series - Manual (Page 210)

5. Open the front door.
Figure 12-5 Clear jams in the duplex printing accessory (4 of 6)
6. Check for paper in the duplex printing accessory area, and remove any paper by pulling it out of
the MFP. Be careful not to tear the paper.
Figure 12-6 Clear jams in the duplex printing accessory (5 of 6)
7. Reinstall the duplex printing accessory by sliding it back into the slot until it locks into place.
Figure 12-7 Clear jams in the duplex printing accessory (6 of 6)
8. Close all open doors. Push the output device back into place.
Clear jams from the input-tray areas
Clear jams in tray 1
1. Check for media in the tray 1 area, and remove any media from this area. Carefully check to be
sure you have removed all pieces of torn media.
Figure 12-8 Clear jams in tray 1 (1 of 2)
196 Chapter 12 Problem solve ENWW