HP LaserJet M9040M9050 Multifunction Printer series User Manual
Page 224
9.
Push the stapler/stacker back into place.
Figure 12-61
Clear a staple jam from the stapler/stacker (9 of 9)
NOTE:
The stapler needs to reload after clearing a staple jam, so the first few documents (no more
than five) might not be stapled. If a print job is sent and the stapler is jammed or is out of staples, the
job will still print as long as the path to the output bin is not blocked.
Clear jams in the left door (fuser area)
1.
Move the output device away from the MFP to gain access to the left door.
Figure 12-62
Clear jams in the left door (1 of 4)
2.
Open the left door.
WARNING!
Avoid touching the adjacent fusing area. It can be hot.
Figure 12-63
Clear jams in the left door (2 of 4)
3.
Remove any jammed or damaged media from this area by pulling it out of the MFP.
210 Chapter 12 Problem solve
ENWW