HP LaserJet M9040M9050 Multifunction Printer series - Manual (Page 69)

4. Insert the product CD-ROM into the CD-ROM drive.
If the welcome screen does not open, start it by using the following procedure:
a. On the Start menu, click Run.
b. Type the following: X:\setup (where X is the letter of the CD-ROM drive).
c. Click OK.
5. When prompted, click Install. The print driver screen appears.
6. Select the driver to be installed and follow the instructions on the computer screen
7. Click Finish when the installation has completed.
8. From the Next Steps screen, select Add, Tonal options or driver if desired.
9. Select Exit to close the installer.
10. You might need to restart the computer.
11. Print a test page from any software program to make sure that the software is correctly installed.
Remove software for Windows
1. Click Start, and then click All Programs.
2. Click HP, and then click HP LaserJet M9040 and HP LaserJet M9050 MFP.
3. Click Uninstall HP LaserJet M9040 and HP LaserJet M9050 MFP, and then follow the onscreen
instructions to remove the software.
ENWW Install the Windows software 55