Initiating the self‐test – HP Tower Uninterruptible Power System User Manual
Page 19
Advertising
OPERATION
HP T750 G2, HP T750J, HP T1000 G3, HP T1000J, HP T1500 G3, and HP T1500J UPS Models User Guide
S 505922-002
12
Initiating the Self‐Test
NOTE:
The batteries must be fully charged and the UPS must not be in Battery mode to
perform the self‐test.
Press and hold the
(Test/Alarm Reset) button for three seconds to initiate the self‐test.
During the five-second test, the bar graph indicators cycle through twice. If the UPS
beeps or a UPS alarm indicator stays on, see “Troubleshooting” on page 27.
Advertising