HP Tower Uninterruptible Power System - Manual (Page 5)

This marking is valid for non-Telecom products and EU harmonized Telecom products (e.g. Bluetooth).
This marking is valid for EU non-harmonized Telecom products.
*Notified body number (used only if applicable—refer to the product label)
Hewlett-Packard GmbH, HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, Germany
This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household
waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection
point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste
equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that
protects human health and the environment. For more information about where you can drop off your waste equipment for
recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the
product.
Japanese notice
この᎕ਾは、クラスBእ਑ᑠጣ᎕ਾです。この᎕ਾは、ඖႍ⚐੣でş✈することをƾŔとしていますが、
この᎕ਾがラジオやテレビジョンַǁ᰿に᪡ᖅしてş✈されると、ַǁⅬඓをჵきᡇこすことがありま
す。ֶᑑᕼ៮ᣘにᅳって ᵃしいֶりᑑいをして⛻さい。VCCI-B
Battery replacement notice
WARNING: Power products contain sealed lead-acid battery modules. A risk of fire and burns exists if the battery is not
properly handled. To reduce the risk of personal injury:
S Do not attempt to recharge the battery.
S Do not expose the battery to temperatures higher than 60°C (140°F).
S Do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water. The battery might explode.
Batteries, battery packs, and accumulators should not be disposed of together with the general household waste. To
forward them to recycling or proper disposal, use the public collection system or return them to HP, an authorized
HP Partner, or their agents.
For more information about battery replacement or proper disposal, contact an authorized reseller or an authorized service provider.
Power cord statement for Japan
Electrostatic discharge
Preventing electrostatic discharge
To prevent damaging the system, be aware of the precautions you need to follow when setting up the system or handling parts. A discharge
of static electricity from a finger or other conductor may damage system boards or other static-sensitive devices. This type of damage may
reduce the life expectancy of the device.
To prevent electrostatic damage:
S Avoid hand contact by transporting and storing products in static-safe containers.
S Keep electrostatic-sensitive parts in their containers until they arrive at static-free workstations.
S Place parts on a grounded surface before removing them from their containers.
S Avoid touching pins, leads, or circuitry.
S Always be properly grounded when touching a static-sensitive component or assembly.