HP Officejet Pro 8600 - Manual (Page 117)

Paper mismatch
Check the settings
Verify that the loaded media size and type matches the control panel settings.
Solve scan problems
TIP: You can visit the HP online support website at www.hp.com/go/customercare
for information and utilities that can help you correct many common printer
problems.
• Scanner did nothing
• Scan takes too long
• Part of the document did not scan or text is missing
• Text cannot be edited
• Error messages appear
• Scanned image quality is poor
• Scan defects are apparent
Scanner did nothing
• Check the original
Make sure that the original is loaded correctly. For more information, see Load an
original in the automatic document feeder (ADF) or Load an original on the
scanner glass.
• Check the printer
The printer might be coming out of Sleep mode after a period of inactivity, which
delays processing a short while. Wait until the printer displays the Home screen.
• Check the HP software
Make sure the HP software provided with the printer is installed correctly.
Scan takes too long
• Check the settings
◦
If you set the resolution too high, the scan job takes longer and results in
larger files. To obtain good results, do not use a resolution that is higher
than needed. You can lower the resolution to scan more quickly.
◦ If you acquire an image through TWAIN, you can change the settings so
that the original scans in black and white. See the onscreen Help for the
TWAIN program for information.
• Check the status of the printer
If you sent a print or copy job before you tried to scan, the scan starts if the
scanner is not busy. However, the printing and scanning processes share
memory, which means that the scan might be slower.
Solve scan problems 113