HP 3PAR Application Software Suite for Microsoft Exchange - Manual (Page 61)

NOTE: Symantec NetBackup software is case sensitive. Make sure all information entered
pertaining to the policy is supplied with the proper case.
Example
(for Exchange 2010) The following command uses NetBackup to perform a backup of virtual copy
020405162103
whose data has currently been mounted on the server S1.
RMExch backup -mdb mailboxdatabase -t 020405162103 -vs S1 -p test -d
full -m bottlenosed
The following command uses Data Protector to perform a backup of virtual copy 07221102153.
RMExch backup -mdb mailboxdatabase -t 072211021532 -vs S1 -dl rme_dl
(for Exchange 2007) The following command performs a backup of virtual copy 020405162103
whose data has currently been mounted.
RMExch backup -s bottlenosed -g sg2 -t 020405162103 -p test -d full -m
bottlenosed
RMExch config
SYNTAX
To change/query the timeout value for NetBackup initialization process detection:
RMExch config -h <WindowsHost> -bktmout [-sec <seconds>]
To change/query the monitoring interval for remote copy progress on target server:
RMExch config -h <WindowsHost> -rcintvl [-min <Minutes>]
DESCRIPTION
The RMExch config command will display or change the timeout value for NetBackup initialization
process detection for backup operation and the monitoring interval for remote copy progress on
target server.
PARAMETERS
The following options are supported:
•
-h <WindowsHost> - Specify the Recovery Manager installed Windows host to change or
query settings. If host is in another domain, specify the FQDN.
•
-bktmout - Setup or inquiry for Backup process timeout value to confirm that NetBackup has
received the backup request. The timeout range is 0 to 86400 seconds. Default is 30 seconds.
•
-sec <seconds> - Optional. Number of seconds.
•
-min <minutes> - Optional. Number of minutes.
•
-rcintvl - Setup or inquiry for Remote Copy process monitoring interval within a range of
3 to 15 minutes. Default is 3 minutes.
Example
The following command will change remote copy monitoring interval to 10 minutes.
RMExch config -h Grampus -rcintvl -min 10
RMExch config 61