HP 3PAR Application Software Suite for Microsoft Exchange User Manual
Page 96
Advertising
Performing a Volume Copy Restore to a Point-of-Failure
1.
Locate the specific database timestamp in the left pane and right-click.
2.
Select Restore Using
→Volume.
3.
Select Point of failure.
Search and enter the log file location.
Figure 15 Volume Copy Restore at Point of Failure
4.
Read the following operation before checking the Click to continue box and clicking Finish to
proceed with restoration.
WARNING!
Do not perform a volume restore if multiple databases are created in a single
volume.
Figure 16 Volume Copy Restore at Point of Failure Operations
96
Rapid Backup and Recovery for Exchange
Advertising