HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem User Manual

Page 101

Advertising
background image

Command line 101

Name

RFC

Description

numBBCreditZero

FCMGMT-
MIB

connUnitPortStatCountBBCreditZero -
Count of transitions in/out of BBcredit
zero state. The other side is not

providing any credit.

numBytesRx

N/A

Total number of bytes received.

numBytesTx

N/A

Total number of bytes transmitted.

numCRCErrors

FCMGMT-
MIB

connUnitPortStatCountInvalidCRC -
Count of frames received with invalid
CRC. This count is part of the Link Error

Status Block (LESB). (FC-PH 29.8). Loop
ports should not count CRC errors

passing through when monitoring.

numClass3Discards

FCMGMT-
MIB

connUnitPortStatCountClass3Discards -
Count of Class 3 Frames that were

discarded upon reception at this port.
There is no FBSY or FRJT generated for
Class 3 Frames. They are simply

discarded if they cannot be delivered.

numEncodingDisparityE

rrors

FCMGMT-
MIB

connUnitPortStatCountEncodingDisparit
yErrors - Count of disparity errors

received at this port.

numFBSYFrames

FCMGMT-

MIB

connUnitPortStatCountFBSYFrames -

Count of times that FBSY was returned to
this port as a result of a frame that could
not be delivered to the other end of the

link. This occurs if either the Fabric or the
destination port is temporarily busy. Port
can only occur on SOFc1 frames (the

frames that establish a connection). This
is the sum of all classes.

numFRJTFrames

FCMGMT-

MIB

connUnitPortStatCountFRJTFrames -

Count of times that FRJT was returned to
this port as a result of a Frame that was
rejected by the fabric. This is the total for

all classes.

numFramesTooLong

FCMGMT-

MIB

connUnitPortStatCountFramesTooLong -

Count of frames received at this port
where the frame length was greater than
what was agreed to in FLOGI/PLOGI.

This could be caused by losing the end of
frame delimiter.

numInputBuffersFull

FCMGMT-

MIB

connUnitPortStatCountInputBuffersFull -

Count of occurrences when all input
buffers of a port were full and outbound
buffer-to-buffer credit transitioned to

zero. There is no credit to provide to
other side.

numInvalidOrderedSets FCMGMT-

MIB

connUnitPortStatCountInvalidOrderedSe

ts - Count of invalid ordered sets
received at port. This count is part of the
Link Error Status Block (LESB). (FC-PH

29.8).

Advertising