HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 66)

Command line 66
Item Description
category|All|None>][FcCategories=<fc trap
category|All|None>]
Parameter
Name (required) A unique name for the new trap being added
Properties
Address (required) IPv4 address or DNS name for the trap destination
Community (optional) The SNMP community name string for the specified trap. The default value is
"public" if not specified. For VC-Enet modules, the maximum string length is 39. For
VC-FC modules, the maximum string length is 24.
Format Format of the new trap. Valid values are "SNMPv1" and "SNMPv2". The default is
"SNMPv1" if not specified.
Severities Trap severities to send to the destination. Valid values are "Normal", "Unknown",
"Info", "Warning", "Minor", "Major", "Critical", "All", and "None".
Multiple severities can be provided, separated by commas. The default severity is
"None".
DomainCategories The Virtual Connect Domain trap categories to send to the destination. Valid values
are "Legacy", "DomainStatus", "NetworkStatus", "FabricStatus", "ProfileStatus",
"ServerStatus", "EnetStatus", FcStatus", "All", and "None".
Multiple categories can be specified, separated by commas.
EnetCategories The Virtual Connect Ethernet trap categories to send to the destination. Valid values
are "PortStatus", "PortThreshold", "Other", "All", and "None".
Multiple categories can be specified, separated by commas.
FcCategories The Virtual Connect Fibre Channel trap categories to send to the destination. Valid
values are "PortStatus", "Other", "All", and "None".
Multiple categories can be specified, separated by commas.
Examples
->add snmp-trap EnetManagementStation Address=192.112.34.10
Community=private Format=SNMPv1 Severity=Normal,Critical
EnetCategories=Other
Adds a new trap destination for VC-Enet modules
->add snmp-trap FcManagementStation Address=192.112.72.3
Community=private Format=SNMPv1 FcCategories=Other
Adds a new trap destination for VC-FC modules
->add snmp-trap MyTrap Address=192.112.66.12
Adds a new trap using typical defaults
->add snmp-trap MyTrap Address=192.112.42.5 Severity=All
FcCategories=All DomainCategories=All
Adds a trap with all severity and category properties set. Severities are allowed
even though FC Categories are set; the severities will be applied to the Domain
Categories.
Item Description
remove snmp-trap Removes a previously configured SNMP trap destination
Syntax
remove snmp-trap <Name | *>
Parameter
Name (required) The name of the trap destination to be removed. If "*" is specified, then all traps are
removed.
Examples
->remove snmp-trap MyTrap1
Removes an SNMP trap destination