HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 17)

Command line 17
Managed element Description
firmware (on page 36 ) Manage interconnect module firmware
igmp (on page 36 )
Manage Ethernet IGMP Snooping settings
interconnect (on page 37 ) Manage I/O interconnect modules
iscsi-boot-param (on page 38 ) Manage iSCSI boot parameters
iscsi-connection (on page 41 ) Manage iSCSI connections
ldap (on page 43 ) Manage LDAP configuration settings
ldap-certificate (on page 44 ) Manage LDAP certificate information
ldap-group (on page 45 ) Manage LDAP group configuration settings
link-dist-interval (on page 47 ) Manage the FC login re-distribution interval
log-target (on page 48 ) Manage remote log destination settings
mac-cache (on page 50 ) Manage Ethernet MAC cache failover settings
network (on page 50 ) Manage Virtual Connect Ethernet networks
port-monitor (on page 53 ) Monitor port monitor configurations
profile (on page 56 ) Manage Virtual Connect server profiles
server (on page 58 ) Manage physical HP BladeSystem servers
serverid (on page 61 )
Manage virtual server ID configuration settings
server-port (on page 62 )
Display all physical server ports
server-port-map (on page 62 )
Manage shared server downlink port mapping configuration
snmp (on page 64 ) Modify SNMP configurations
snmp-trap (on page 65 ) Modify SNMP-trap configurations
ssh (on page 68 ) Display SSL configuration and information
ssl-certificate (on page 69 ) Manage SSL certificate information
ssl-csr (on page 70 ) Manage an SSL certificate signing request
ssl (on page 69 ) Manage weak SSL encryption
stackinglink (on page 70 ) Display stacking link information and status
statistics (on page 71 )
Display or reset statistics on a designated interconnect module
port
status (on page 72 )
Display overall Virtual Connect domain status information
supportinfo (on page 72 )
Manage Virtual Connect support information
systemlog (on page 73 )
Display Virtual Connect Manager system event log
uplinkport (on page 73 ) Manage interconnect module uplink ports
uplinkset (on page 76 ) Manage shared uplink port sets
user (on page 77 ) Manage local Virtual Connect user configurations
user-security (on page 79 ) Manage user security settings
vcm (on page 79 ) Manage the Virtual Connect domain manager
version (on page 80 )
Display CLI version information
The following sections provide detailed information on how the subcommands are used with each managed
element.
To display command help, enter a command followed by ? or -help. For more information on the help
subcommand, see "Help subsystem (on page 80 )."