HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 106)

Command line 106
Object type
connUnitPortStatCountLinkFailures
Description The number of link failures. This number is part of the LESB. (FC-PH 29.8).
::= { connUnitPortStatEntry 39 }
LINKRESETRECEIVED
Object type
connUnitPortStatCountRxLinkResets
Description The number of link resets. This is the number of LRs received.
::= { connUnitPortStatEntry 33 }
LINKRESETTRANSMITTED
Object type
connUnitPortStatCountTxLinkResets
Description The number of link resets. This is the number LRs transmitted.
::= { connUnitPortStatEntry 34 }
LOSSOFSIGNALCOUNTER
Object type
connUnitPortStatCountLossofSignal
Description The number of instances of signal loss detected at a port. This count is part of the LESB.
(FC-PH 29.8)
::= { connUnitPortStatEntry 43 }
LOSSOFSYNCOUNTER
Object type
connUnitPortStatCountLossofSynchronization
Description The number of instances of synchronization loss detected at a port. This number is part
of the LESB. (FC-PH 29.8).
::= { connUnitPortStatEntry 44 }
MULTICASTFRAMESRECEIVED
Object type
connUnitPortStatCountRxMulticastObjects
Description The number of Multicast Frames or Packets received at this port
::= { connUnitPortStatEntry 29 }
MULTICASTFRAMESTRANSMITTED
Object type
connUnitPortStatCountTxMulticastObjects
Description
The number of Multicast Frames or Packets transmitted out of this port
::= { connUnitPortStatEntry 30 }
PBSYFRAMES
Object type
connUnitPortStatCountPBSYFrames
Description The number of times that PBSY is returned to this port as a result of a frame that cannot
be delivered to the other end of the link. This occurs if the destination port is temporarily
busy. PBSY can only occur on SOFc1 frames (the frames that establish a connection).
This is a Fibre Channel-only statistic. This is the sum of all classes. If you cannot keep the
by class counters, then keep the sum counters.
::= { connUnitPortStatEntry 11 }
PRIMITIVESEQPROTOCOLERRCOUNT