HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 52)

Command line 52
Item Description
remove network Remove a network from the domain. To remove a network, it must not be in use by any
server profiles.
Syntax
remove network <NetworkName | *>
Parameter
NetworkName
(required)
The name of an existing network in the domain. A network name of "*" removes all
networks.
Examples
->remove network MyNetwork
Removes a network
->remove network *
Removes all networks
Item Description
set network Modify an existing Ethernet network.
Syntax
set network <NetworkName> [-quiet] [Name=<NewName>]
[State=<Enabled|Disabled>]
[SmartLink=<Enabled|Disabled>][NativeVLAN=<Enabled|Disabled>]
[Private=<Enabled|Disabled>] [VlanId=<New VLanId>]
[ConnectionMode=<Auto|Failover>]
[VLanTunnel=<Enabled|Disabled>] [PrefSpeedType=<Auto|Custom>]
[PrefSpeed=<100Mb–10Gb in 100Mb increments>]
[MaxSpeedType=<UnRestricted|Custom>] [MaxSpeed=<100Mb–10Gb in
100Mb increments>]
Parameter
NetworkName
(required)
The name of an existing network to modify
Option
Quiet (optional) Suppresses user confirmation prompts during network creation and modification. This
option is used mainly in automated scripting scenarios.
Properties
Name (optional) The new name of the network
State (optional) Enables or disables the network. Valid values are "Enabled" and "Disabled".
SmartLink
(optional)
Enables or disables the SmartLink capability for a port. Valid values include "Enabled"
and "Disabled".
SmartLink cannot be modified unless one or more ports are added to the network.
NativeVLAN
(optional)
Enables or disables the network to act as a native VLAN. Valid values are "Enabled"
and "Disabled". The default value is "Disabled". This property can be configured only
if it is applied to a shared network.
Private
(optional)
Enables or disables the network to act as a private network. Valid values are "Enabled"
and "Disabled". The default value is "Disabled".
VLanID (optional) Modifies the VLAN ID of the network if it belongs to a shared uplink set that has not
been configured.
ConnectionMode
(optional)
Specifies the connection type that is formed when multiple ports are added to the
network. Valid values include "Auto" and "Failover". The default value is "Auto".
VLanTunnel
(optional)
Enables or disables VLAN tag tunneling. If enabled, VLAN tags are passed through the
domain without any modification. If disabled, all tagged frames are discarded.
If multiple networks are configured on any server port, this option cannot be modified.
PrefSpeedType
(Optional)
Default connection speed for any Ethernet connection attached to this network. Valid
values include "Auto" and "Custom". "Custom" enables the user to configure the
preferred speed. The default value is "Auto".