HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 7)

Introduction 7
Command Changes Virtual Connect 3.00 Virtual Connect 3.10
"Secondary". Boot Priority is set to
either Primary or
Secondary
remove interconnect The "remove
interconnect"
command is no longer
supported.
The remove
interconnect
<ModuleName | *>
Not supported
help iscsi-boot-param
set iscsi-boot-param
show iscsi-boot-param
Added support for
"iscsi-boot-param,"
which enables the user
to set and show iSCSI
boot parameters of a
specified iSCSI
connection.
Not supported, but the
help file shows these
commands.
All these commands are
supported.
help iscsi-connectionadd
iscsi-connectionremove
iscsi-connectionset
iscsi-connectionshow
iscsi-connection
Added support for
"iscsi-connection,"
which enables the user
to add, set, remove,
and show iSCSI
connections.
Not supported, but the
help file shows these
commands.
All these commands are
supported.
add user A note has been
added in the help file
indicating that the
maximum length of the
"username" property is
31 characters.
Not present The maximum length of
username string is 31
characters.
add user
set user
A note has been
added in the help file
indicating that the
length of the
"password" property
is a minimum of 3 and
a maximum of 31
characters.
Not present The length of the
"password" property is a
minimum of 3 characters
and a maximum of 31
characters.
add user
set user
A note has been
added in the help file
indicating, that the
maximum length of
"fullname" property is
63 characters.
Not present The maximum length of
the "fullname" property is
63 characters.
add user
set user
A note has been
added in the help file
indicating that the
maximum length of
"contactInfo" property
is 127 characters.
Not present The maximum length of
the "contactinfo"
property is 127
characters.
show server-port Added status of the
Device Control
Channel (DCC) for
Flex10
No DCC status DCC available and DCC
version