HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 76)

Command line 76
Item Description
->show uplinkport status=Linked
Displays all the uplink ports that are linked
->show uplinkport ID=enc0:1 type=RJ45
Displays all the uplink ports for the specific bay 1 with connector type RJ-45
uplinkset
Manage shared uplink port sets
Supported actions: add, help, remove, set, show
Item Description
add uplinkset Create a new shared uplink port set.
Syntax
add uplinkset <UplinkSetName>
[ConnectionMode=<Auto|Failover>]
Parameter
UplinkSetName
(required)
The unique name of the new shared uplink port set to create
Property
ConnectionMode
(optional)
Specifies the connection type that is formed when multiple ports are added to the
uplinkset. Valid values include "Auto" and "Failover". The default value is "Auto".
Examples
->add uplinkset MyNewUplinkSet
Creates a new shared uplink port set and adds it to the domain
->add uplinkset MyNewUplinkSet ConnectionMode=Failover
Creates a new shared uplinkset and sets the connection mode to failover
Item Description
remove uplinkset Remove a shared uplink port set from the domain.
Syntax
remove uplinkset <UplinkSetName | *>
Parameter
UplinkSetName
(required)
The name of an existing shared uplink port set. "*" removes all the existing uplink
port sets from the domain.
Example
->remove uplinkset MyUplinkSet
Removes a shared uplink port set
Item Description
set uplinkset Modify an existing shared uplink port set.
Syntax
set uplinkset <UplinkSetName> [Name=<NewName>]
[ConnectionMode=<Auto|Failover>]
Parameter
UplinkSetName
(required)
The name of an existing shared uplink set to modify
Properties
Name (optional) The new name of the shared uplink set
ConnectionMode
(optional)
Specifies the connection type that is formed when multiple ports are added to the
uplinkset. Valid values include "Auto" and "Failover". The default value is "Auto".