HP XP P9500 Storage - Manual (Page 96)

12. In the Initial SSID text box, type the 4-digit SSID of a hexadecimal number (0004 to FFFE).
To confirm the created SSID, click View SSID to display the View SSID windows.
13. From the Cache Partition list, select CLPR.
14. From the Processor Blade list, select a processor blade.
Select a processor blade to be used by the LDEVs. To assign a specific processor blade, select
the ID of the processor blade. To allow the storage system to assign processor blades to the
LDEVs being created, click Auto.
15. If necessary, change the settings of the TSE-VOLs.
You can change the following settings:
•
Editing SSID
Click Edit SSIDs to open the SSIDs window. For details about how to edit SSIDs, see
“Editing the TSE-VOL SSID” (page 96) .
•
Changing the LDEV settings
Click Change LDEV Settings to open the Change LDEV Settings window. For details about
how to change the LDEV settings, see
“Changing the TSE-VOL settings” (page 97) .
16. If necessary, delete a line from the Selected LDEVs table.
Select a line to be deleted, and then click Remove. For details about how to remove a line,
see
“Removing the TSE-VOL from the registering task” (page 97) .
17. Click Add.
The created TSE-VOLs are added to the right Selected LDEVs table. If invalid values are set,
an error message appears.
You cannot click Add until after all required items have been entered or selected. Required
items are marked by an asterisk (*) and include Provisioning Type, System Type, Emulation
Type, Pool Selection, LDEV Capacity, and Number of LDEVs.
18. Click Finish.
The Confirm window appears.
19. In the Task Name in the text box, enter the task name.
You can enter up to 32 ASCII characters and symbols in all, except for \ / : , ; * ? " < > |.
"yymmdd-window name" is entered as a default.
20. Click Apply.
If the Go to tasks window for status check box is selected, the Tasks window appears.
Editing the TSE-VOL SSID
Before registering a TSE-VOL, you may need to edit its SSID.
To edit the TSE-VOL SSID:
1.
Go to the Selected LDEVs table in the Create LDEVs window and click Edit SSIDs.
The Edit SSIDs window appears. The SSIDs table shows the SSID existing and to be added.
2. If you change SSID, select the appropriate line and click Change SSID.
The Change SSID window appears.
3. Enter the new SSID and click OK.
The Edit SSIDs window appears.
4. Click OK.
The Create LDEVs window appears.
96 Performing Compatible FlashCopy SE operations