Changing the tse-vol settings, Removing the tse-vol from the registering task, About operating pools and tse-vols – HP XP P9500 Storage User Manual
Page 97: Operating when pool is full
5.
Click Finish.
The Confirm window appears.
6.
Click Apply.
If the Go to tasks window for status check box is selected, the Tasks window appears.
Changing the TSE-VOL settings
Before registering a TSE-VOL, you may need to change the TSE-VOL settings.
To change the TSE-VOL settings:
1.
In the Selected LDEVs table in the Create LDEVs window, select LDEV and click Change LDEV
Settings.
The Change LDEV Settings window appears.
2.
In the Change LDEV Settings window, you can change the setting of LDEV Name, Initial LDEV
ID, or Processor Blade.
•
If you change LDEV Name, specify the prefix characters and the initial number of LDEV.
•
If you change Initial LDEV ID, specify the number of LDKC, CU, DEV, and Interval. To
check used LDEVs, click View LDEV IDs to confirm the used LDEVs. The View LDEV IDs
window appears.
•
If you change Processor Blade, click the list and specify the processor blade ID. If the
specific processor blade is specified, click the processor blade ID. To allow the storage
system to assign the processor blade, click Auto.
3.
Change the settings and click OK.
The Create LDEVs window appears.
4.
Click Finish.
The Confirm window appears.
5.
Click Apply.
The setting is changed.
If the Go to tasks window for status check box is selected, the Tasks window appears.
Removing the TSE-VOL from the registering task
If you do not want to register the TSE-VOL, you can remove it from the registering task.
To remove the TSE-VOL from the registering task:
1.
In the Selected LDEVs table in the Create LDEVs window, select LDEV and click Remove.
2.
Click Finish.
The Confirm window appears.
3.
Click Apply.
The LDEV is removed.
If the Go to tasks window for status check box is selected, the Tasks window appears.
About Operating Pools and TSE-VOLS
Operating when Pool is full
The usage amount in a pool is controlled in units of pages along with Thin Provisioning Z, and the
usage amount for TSE-VOL is controlled in units of track in that page. Even if a pool becomes full,
About Operating Pools and TSE-VOLS
97