Sr-iov – HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem User Manual

Page 161

Advertising
background image

Virtual Connect server profiles 161

The total actual shareable bandwidth cannot exceed 10Gb; however, the preferred speed and maximum

bandwidth settings can exceed a total of 10Gb, allowing ports to take advantage of unused bandwidth
when available.
A Flex-10 capable NIC (embedded Ethernet or mezzanine card) is seen as eight FlexNICs per 10Gb port if

that NIC is directly connected to an HP Virtual Connect Flex-10 or FlexFabric module. Eight FlexNICs are

indicated when connected to an empty interconnect bay because it is assumed that an HP Virtual Connect
Flex-10 or FlexFabric module will be installed in that bay. If a Flex-10-capable NIC is connected to a Virtual

Connect interconnect module that does not support Flex-10 or a non-Virtual Connect interconnect module,

that NIC is seen as only one Ethernet device per physical port.
The following table shows an example of how a BL495c Flex-10 embedded dual port NIC would be
presented when connected to different interconnects. For more information about mapping between servers

and interconnect bays, see the HP BladeSystem c-Class enclosure documentation on the Installing tab of the

HP BladeSystem Technical Resources website (

http://www.hp.com/go/bladesystem/documentation

).

Connected to

Number of NICs presented to the
host

HP Virtual Connect FlexFabric
10Gb/24-port Module

8

HP Virtual Connect Flex-10 10Gb
Ethernet Module

8

HP Virtual Connect Flex-10/10D

Module

8

HP GbE2c Ethernet Blade Switch

2

Cisco Catalyst Blade Switch 3120

2

HP 10GbE Pass-Thru Module

2

Empty interconnect bay

8

SR-IOV

Beginning with VC 4.10, VC supports SR-IOV by automatically allocating all Virtual Functions (VFs) to the
third Physical Function (PF) on each port of the server. VC enables SR-IOV on certain BLOMs, mezzanine

cards for Gen8 servers, and LOMs for G7 servers. SR-IOV is not enabled on Integrity servers. Starting with

VC 4.10, the following are FFAs supported:

HP Flex-10 10Gb 2-port 530FLB Adapter

HP FlexFabric 10Gb 2-port 534FLB Adapter

HP Flex-10 10Gb 2-port 530M Adapter

HP FlexFabric 10Gb 2-port 534M Adapter

HP NC552m Flex-10 Adapter

HP NC553m 10Gb 2-P FlexFabric Converged Network Adapter

HP FlexFabric 10Gb 2-port 554M Adapter

HP Flex-10 10Gb 2-port 552M Adapter

HP FlexFabric 10Gb 2-port 554FLB Adapter

HP FlexFabric Embedded Ethernet on the BL620c G7 and BL680c G7

The following operating systems are supported:

Advertising