HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 251)

Virtual Connect modules 251
Server Bays Summary screen
Device bay numbering is affected by whether the 'Allow the double density device bays' option was selected
while using the Domain Setup Wizard. Bays might appear as 'Covered' or 'Unknown.' For more
information, see "Double-dense server bay option (on page 251 )."
If a multi-blade server is installed, the bay numbering shows a span of bays, for example, Bays 1-4, in the Bay
column. For more information, see "Multi-blade servers (on page 159 )."
The following table describes the columns within the Server Bays Summary screen.
Column Description
Bay Bay number
Status Status of the server blade in the bay
Device Type of server blade installed in the bay
Power
Icon indicates whether the server blade is powered on or off
Assigned Profile Name of the server profile assigned to the device bay
Double-dense server bay option
If the "Allow the double density device bays" option was selected while using the Domain Setup Wizard, VC
Manager displays the server bays as double-dense, regardless of the actual hardware installed.
For example, if a full-height server blade is installed in physical Bay 1 of a double-dense enabled enclosure,
Bay 1A and Bay 1B in VC Manager are displayed as COVERED. If a double-dense server blade is installed
in physical Bay 1, Bay 1 in VC Manager is displayed as COVERED, and Bays 1A and 1B display the
appropriate double-dense server blade information.