HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 87)

Virtual Connect networks 87
The following figure shows tunneled VLAN tags. On the dedicated green network, both uplink and server
VLAN tags are tunneled through Virtual Connect unchanged. On the shared red and blue networks, uplink
VLAN tags are mapped to networks. Untagged frames are mapped to the native VLAN, if present.
Otherwise, they are dropped. Server frames are untagged only, and tagged frames are dropped. Each
server port is connected to a single network.
Managing networks
Use the following screens to manage Virtual Connect networks:
• Network Access Groups screen (on page 89 )
o View networks that are members of a network access group
o Add a new network access group
o Edit the properties of an existing network access group
o Delete a network access group
• Define Network Access Group screen (on page 91 )
o Define a new network access group
• Edit Network Access Group screen (on page 91 )
o Edit the properties of an existing network access group
• Ethernet Settings (MAC Addresses) screen (on page 171 )
o Select whether to use Virtual Connect assigned MAC Addresses or factory-default MAC Addresses
o Select the type and range of MAC Addresses
• Ethernet Settings (Port Monitoring) screen (on page 92 )
o Duplicate network traffic to an unused uplink port to monitor or debug network traffic on those server
ports
• Select Monitored Ports screen (on page 95 )
o Select server ports to monitor