HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 282)

Appendix B: Auto-deployment process 282
NOTE: No enclosures currently exist in the domain. Please use the 'import
enclosure' command to import an enclosure.
GETTING STARTED:
help : Displays a list of available subcommands
exit : Quits the command shell
<subcommand> ? : Displays a list of managed elements for a subcommand
<subcommand> <managed element> ? : Displays detailed help for a command
->import enclosure username=Administrator password=MyPassword
Importing enclosure, please wait...
SUCCESS: Enclosure imported
Auto-deployment settings after enclosure import
After the enclosure is imported, auto-deployment status shows that a configuration has not yet been
deployed, as indicated by the "Not Deployed" information in the status field. The "Last Deployment" field is
blank because a deployment has not yet been attempted. The "TFTP Mode" is set to "Auto", which is the
default setting. This means that the TFTP settings will be acquired from the DHCP server during deployment.
If the DHCP server is configured properly to support auto-deployment, the TFTP server and TFTP file fields are
populated with the TFTP server and configuration file that is used for deployment. If the DHCP server is not
configured properly, the TFTP server and file are blank.
->show auto-deployment
=====================================================================
Status Last TFTP TFTP Server TFTP File
Deployment Mode
=====================================================================
Not -- -- AUTO 192.168.1.102 myconfig.script
Deployed
---------------------------------------------------------------------
Starting a deployment operation
To initiate a deployment operation, enter the start auto-deployment command in the CLI console. After
the deployment process is started, you can use the show auto-deployment command to view status
throughout the deployment process.
After a deployment is started, the firmware enters a deployment mode. If the DHCP server and TFTP server
are properly configured to support auto-deployment and exist on the management network, a deployment
occurs.
->start auto-deployment
WARNING: Initiating the deployment process will power off all physical
servers and clear all current VC domain configuration, resulting in an outage.
Are you sure you want to continue? (yes/no) : yes
SUCCESS: Auto-deployment started
<Session will be logged out>