Managing snmp, Snmp overview – HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem User Manual
Page 32
Virtual Connect domains 32
6.
Click Apply.
Managing SNMP
Use the following screens to manage the domain SNMP configuration:
•
SNMP Configuration (VC-Enet) (on page
o
Enable SNMP on VC-Enet modules in the domain
o
Configure SNMP access
o
Add, modify, or delete a trap destination
•
SNMP Configuration (VC-FC) (on page
o
Enable SNMP on VC-FC modules in the domain
o
Enable SMI-S on VC-FC modules in the domain
o
Configure SNMP access
o
Add, modify, or delete a trap destination
SNMP overview
SNMP is used by network management systems to monitor network-attached devices for conditions that
require administrative attention. SNMP consists of a set of standards for network management, including an
Application Layer protocol, a database schema, and a set of data objects.
The SNMP configuration is controlled by VCM and applies to all modules in the VC domain. The SNMP
agent software residing on a primary module provides access to managed information using SNMP