HP ESL E-series Tape Libraries - Manual (Page 118)

Sense
key
ASC ASCQ Message name / description
5 81 F0
PICKER INVALID COMMAND
Picker hardware commanded to position out of system mechanical limits.
Run the Robotics to Home Position test from the OCP.
5 82 E0
ROTARY INVALID START CONDITION
Rotary hardware condition is unknown. Run the Robotics to Home
Position test from the OCP.
5 82 F0
ROTARY INVALID COMMAND
Rotary axis was commanded to a position out of its legal range. This
is an internal code failure.
• Verify that the host software application is supported, has up-to-date
patches, and is correctly configured.
• Verify that the library and its components have the current firmware.
5 83 E0
EXTENSION INVALID START CONDITION
Extension hardware condition is unknown. Run the Robotics to Home
Position test from the OCP.
5 83 F0
EXTENSION INVALID COMMAND
Extension hardware was commanded to a position out of the systems
mechanical limits.
• Verify that the host software application is supported, has up-to-date
patches, and is correctly configured.
• Verify that the library and its components have the current firmware.
5 84 E0
VERTICAL INVALID START CONDITION
Vertical hardware condition is unknown. Run the Robotics to Home
Position test from the OCP.
5 84 F0
VERTICAL INVALID COMMAND
Vertical hardware commanded to position out of system mechanical
limits.
• Run the Robotics to Home Position test from the OCP.
• If the problem persists, calibrate the library.
• Verify that the host software application is supported, has up-to-date
patches, and is correctly configured.
• Verify that the library and its components have the current firmware.
5 85 E0
HORIZONTAL INVALID START CONDITION
Horizontal hardware condition is unknown. Run the Robotics to Home
Position test from the OCP.
5 85 F0
HORIZONTAL INVALID COMMAND
Horizontal hardware commanded to position out of system mechanical
limits.
• Run the Robotics to Home Position test from the OCP.
• If the problem persists, calibrate the library.
• Verify that the host software application is supported, has up-to-date
patches, and is correctly configured.
• Verify that the library and its components have the current firmware.
5 87 F0
DEPTH INVALID START CONDITION
Depth hardware condition is unknown. Run the Robotics to Home
Position test from the OCP.
118 Sense data values