HP ESL E-series Tape Libraries - Manual (Page 51)

1
2
1 Front door latch
2 Power button
Figure 27 Closing the front door
2. Close and lock the back door using the key provided in the accessory kit (see Figure 28 ).
1 2
1 Back door
2 Back door latch
Figure 28 Closing the back door
Powering the library on and off
This discussion contains:
• Powering on the library
• Placing the library on-line or off-line
• Powering off the library
Powering on the library
To power on the library:
1. Verify that power cables are firmly in place.
2. Open the back door of the library cabinet and flip the breaker switches to the on position (right).
The breaker switches are on the power distribution unit located on the bottom right side of the
library cabinet.
3. Close all library doors.
HP StorageWorks 51