HP ESL E-series Tape Libraries - Manual (Page 33)

NOTE:
The number of tape cartridge slots depends on the drive technology used and, on a mixed-media system,
on the ratio of Ultrium and SDLT panels used and their locations. The number of back panel slots
depends on how many drive clusters are in the library. See SDLT library , and Mixed media library for
tape cartridge quantity information.
To slide the slot panels out of the cabinet, press the slot panel latches down and pull the slot panel out of
the cabinet (see Figure 18 ).
1
2
3
1 Upper load port panel latch
2 Middle load port panel latch
3 Lower load port panel latch
Figure 18 Sliding the slot panels out of the cabinet
Figure 19 shows the left panel bins. Begin with panel 1 and load top to bottom and left to right. Continue
with panel 2 in the same manner, and finally, panel 3.
HP StorageWorks 33