HP Color LaserJet CP3505 Printer series - Manual (Page 140)

2. On the right side of the printer, gently pull the black tabs together, and then pull the formatter
assembly from the printer.
3. Place the formatter board on a clean, flat, grounded surface.
To replace a DIMM that is currently installed, spread the latches apart on each side of the DIMM
slot, lift the DIMM up at an angle, and pull it out.
4. Remove the new DIMM from the antistatic package, and then locate the alignment notch on the
bottom edge of the DIMM.
128 Chapter 10 Manage and maintain ENWW