HP ProLiant DL380 G4 Server - Manual (Page 35)

Setup 35
WARNING: To reduce the risk of electric shock, fire, or damage to the equipment, do not
plug telephone or telecommunications connectors into RJ-45 connectors.
IMPORTANT: If the RILOE II board is installed in the server, be sure that you attach the video cable to the
video connector on the rear of the RILOE II board. The standard video connector on the server rear panel is
not used when the RILOE II board is installed. For more information, refer to the HP Remote Insight Lights-Out
Edition II User Guide.
Item Description Color
1 • Hot-plug or non-hot-plug PCI-X expansion slot 3, 64
bit/100 MHz, bus B
• PCI Express x4 slot 2, bus B*
N/A
2 • Hot-plug or non-hot-plug PCI-X expansion slot 2, 64
bit/100 MHz, bus B
• PCI Express x4 slot 1, bus A*
N/A
3 Non-hot-plug PCI-X expansion slot 1, 64 bit/133 MHz, bus A N/A
4 Serial connector Teal
5 iLO connector N/A
6 Mouse connector Green
7 Power cord connector N/A
8 Keyboard connector Purple
9 NIC 1 connector N/A
10 NIC 2 connector N/A
11 USB connectors Black
12 Video connector Blue
13 VHDCI SCSI connector (port 1)** N/A
* x8 PCI Express cards are supported on the SCSI models and will run at x4 speeds. SAS models do not support PCI
Express cards.
**This feature applies only to SCSI models.
3. Connect the power cord to the rear of the server.