HP ProLiant DL380 G4 Server - Manual (Page 55)

Hardware options installation 55
7. Route the cable along the system board.
8. Install the battery pack assembly into the server.
9. Install the PCI riser cage (" Installing the PCI riser cage " on page 56 ).
10. Install the front fan bracket (" Front fan bracket " on page 53 ).
11. Install the access panel (" Installing the access panel " on page 29 ).
12. Power up the server (on page 27 ).
Refer to the option documentation for more information.
Redundant hot-plug AC power supply option
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays
are populated with either a component or a blank.
1. Access the product rear panel (on page 30 ).
2. Remove the power supply blank.