HP ProLiant DL380 G4 Server - Manual (Page 52)

Hardware options installation 52
Identifying hot-plug fans
Item Description Configuration
1 Fan 1 Redundant
2 Fan 2 Primary
3 Fan 3 Redundant
4 Fan 4 Primary
5 Fan 5 Primary
6 Fan 6 Primary
7 Fan 7 Primary
8 Fan 8 Redundant
Installing redundant hot-plug fans
1. Extend the server from the rack, if applicable (" Extend the server from the rack " on page 28 ).
2. Remove the access panel (" Removing the access panel " on page 29 ).
WARNING: The potential for personal injury exists if a hot surface is contacted. Use
caution while performing hot-plug procedures.