HP Insight Control - Manual (Page 52)

10. Choose from the following options:
•
Select whether HP Insight Control server migration must perform disk-error checks on the source
server before migration. By default, Insight Control server migration selects the Use CHKDSK to
detect and fix errors on all source disks prior to migration
checkbox.
•
Select the reboot action that the destination server must perform by choosing one of the following
options:
•
Power off the destination server after migration is complete.
•
Reboot the destination server after migration is complete.
•
If the destination server is selected to reboot upon completion, additional configuration options
are available. If PSP executables are available on the application station and selected, the network
settings on the destination can be configured. For information on how to upload PSP executables,
see the Upload Drivers section.
•
Select a PSP to install on the destination server and configure a static IP for each destination NIC
as needed.
NOTE: If a DHCP-acquired IP address is needed, do not enter any IP addresses.
11. Click Next.
12. Review and confirm the migration details, and then click Begin Migration.
52 Using Insight Control server migration to migrate servers