HP 3Gb SAS Switch for HP BladeSystem c-Class - Manual (Page 14)

Page description
The VSM GUI page is divided as follows:
•
Tabs—Immediately below the HP Virtual SAS Manager banner and at the top-left corner of
the page, tabs are major groupings of VSM tasks.
◦ Zoning tab—For creating and modifying hardware-based zone groups and granting
servers access.
◦ Maintain tab—For maintenance tasks, such as setting switch parameters and updating
switch firmware.
•
System Status section—At-a-glance system information.
•
Systems And Devices—A navigation tree for selecting devices and accessing available tasks.
•
Task section—Available task list for the selected device or data entry fields.
NOTE:
•
In the browser Address field, the IP address or URL of the VSM GUI associated with the
selected switch is displayed.
•
In the center of the HP Virtual SAS Manager banner, the VSM firmware version is displayed.
•
At the far right of the HP Virtual SAS Manager banner, the IP address for VSM CLI access for
the selected switch is displayed.
14 Getting started