HP 3Gb SAS Switch for HP BladeSystem c-Class User Manual
Page 28
The following devices are used in this example:
Model
Device type
c7000
c-Class enclosure
ProLiant BL 460c G1 and ProLiant BL 465c G1
Server blades
P700m
SAS mezzanine cards
3Gb SAS BL Switch, installed in interconnect bays 5 and 6
SAS switch blades
MDS600 storage enclosure
External SAS storage enclosures
1.
Change the Multi-initiator Mode setting to Disabled. This setting controls access to the zone
group, permitting only one server to access each zone group and its associated disk drives.
IMPORTANT:
If tape autoloaders/libraries or shared SAS storage enclosures are also
connected to the switch and multiple server device bays will need access to the same switch-port
zone groups, Multi-initiator Mode must be Enabled.
a.
Access VSM and select the Zoning tab.
b.
Select the switch and click Advanced Settings.
c.
When prompted, expand the Multi-initiator Mode drop-down box and change the setting
to Disabled.
28
Example: Configuring zoned SAS storage enclosures