HP 3Gb SAS Switch for HP BladeSystem c-Class User Manual

Page 29

Text mode
Original mode

Advertising

Create a drive-bay zone group.
a.

In the navigation tree, select Zone Groups and click Create Zone Group.

NOTE:

As shown in this example, when the Drive Bay radio button is selected, discovered

information about each drive bay in each connected storage enclosure is included in the
display.

NOTE:

As shown in this example, one MDS600 storage enclosure is connected to the

3Gb SAS BL switch. Displayed port information for the MDS600 indicates the cabling
connections. For example, Port 51 indicates that one MDS600 drawer is connected to
port 1 of the switch in interconnect bay 5. Port 52 indicates that the other MDS600
drawer is connected to port 2 of the switch in interconnect bay 5.

Advertising