Installing roll media into the printer – HP DesignJet 500 User Manual
Page 35
Advertising
Installing Roll Media into the Printer
This procedure shows you how to load media onto
the spindle and into the printer’s spindle hubs.
NOTE: Make sure the printer wheels are locked (the
brake lever is pressed down) to prevent the printer
from moving.
NOTE: The media roll may be very wide, rest the
spindle horizontally on a table and load the media on
the table.
NOTE: The media should hang down from the roll
exactly as shown.
Click on this
icon to run the animation
sequence.
A
printable version
of the sequence is also available so
that you can take the key illustrations to the printer, if it
is remote from your computer.
Advertising