HP DesignJet 500 - Manual (Page 92)

Media & Ink Introduction Front-Panel Other Index Solutions
Solving
Problems
Image Quality
Problems
Ink Supply
Problems
Media Problems Image Error Other Problems Getting Help
Printer
Options
Aligning the Printheads
The printhead alignment selection causes the printer
to align the printheads immediately, or if an image is
being printed, as soon as the current print job is
finished. The alignment procedure requires a
minimum media size of A1/D-size (24 inches).
The printer will automatically perform an alignment
when printheads are replaced. You can use this
feature if the print quality print indicates an alignment
error. Refer to
Image Quality Problems .
Click on this icon to run the animation
sequence.
A printable version of the sequence is also available
so that you can take the key illustrations to the printer,
if it is remote from your computer.