Setting the subnet mask, Setting the local and default gateway – HP Color LaserJet 4600 Printer series User Manual
Page 64
50
ENWW
Setting the subnet mask
1.
Press
✔
to enter the
MENUS
.
2.
Press
to highlight
CONFIGURE DEVICE
.
3.
Press
✔
to select
CONFIGURE DEVICE
.
4.
Press
to highlight
I/O
.
5.
Press
✔
to select
I/O
.
6.
Press
to highlight
EIO X
(where X = 1, 2, or 3).
7.
Press
✔
to select
EIO X
.
8.
Press
to highlight
MANUAL
.
9.
Press
✔
to select
MANUAL
.
10. Press
to highlight
SUBNET MASK
.
11. Press
✔
to select
SUBNET MASK
.
Note
The first of three sets of numbers is highlighted. If there is not a number
highlighted, a highlighted empty underscore appears.
12. Press the
or
arrow to to increase or decrease the number
for configuring the subnet mask.
13. Press
✔
to move to the next set of numbers.
14. Repeat steps 12 and 13 until the correct subnet mask is entered.
15. Press the
P
AUSE
/R
ESUME
button to return to the
READY
state.
Setting the local and default gateway
1.
Press
✔
to enter the
MENUS
.
2.
Press
to highlight
CONFIGURE DEVICE
.
3.
Press
✔
to select
CONFIGURE DEVICE
.
4.
Press
to highlight
I/O
.
5.
Press
✔
to select
I/O
.
6.
Press
to highlight
EIO X
(where X = 1, 2, or 3).
7.
Press
✔
to select
EIO X
.
8.
Press
to highlight
MANUAL
.
9.
Press
✔
to select
MANUAL
.
10. Press
to highlight
LOCAL GATEWAY
or
DEFAULT GATEWAY
.
11. Press
✔
to select
LOCAL GATEWAY
or
DEFAULT GATEWAY
.