HP Color LaserJet 4600 Printer series - Manual (Page 83)

ENWW 69
1. Custom/Standard switch
When all three steps are completed, the display will return to the
PAPER HANDLING menu. Once a Custom size is set for a tray, it will be
retained until the switch in the tray is moved back to Standard.
Unit of measure
1. Press  to highlight UNIT OF MEASURE .
2. Press ✔ to select UNIT OF MEASURE .
3. Press  or  to highlight the correct measurement.
4. Press ✔ to select the value.
X dimension
The X Dimension is the width of the page as it feeds into the printer.
1. Press  to highlight X DIMENSION .
2. Press ✔ to select X DIMENSION .
3. Press  or  to highlight the correct value.
4. Press ✔ to select the value. If the value entered is outside the
vaild range, INVALID VALUE will appear for two seconds. The
display prompts you to enter another value.
Y dimension
The Y Dimension is the length of the page as it feeds into the printer.
1. Press  to highlight Y DIMENSION .
2. Press ✔ to select Y DIMENSION .
3. Press  or  to highlight the correct value.
4. Press ✔ to select the value. If the value entered is outside the the
valid range, INVALID VALUE will appear for two seconds. The
display prompts you to enter another value.
1 1