HP Jetdirect 280m 802.11b Wireless Print Server - Manual (Page 102)

HP Jetdirect troubleshooting
Rerun the Install Network Printer Wizard.
The IP address of the printer has changed. You will need to run the Install Network
Printer Wizard to confugure the computer to print to the printer at its new
address. (To run the Install Network Printer Wizard, insert the HP Jetdirect CD
into your computer; select "Install"; select "Wireless"; select "Yes, the wireless
settings have been configured . . ."; and select "Step 2 -- Install the printer on this
computer".)
You should consider assigning a static IP address to the printer, to keep the
address from changing in the future (and causing the same problem again). The
Install Network Printer Wizard offers you an opportunity to specify the IP address
for the printer.
If the Install Network Printer Wizard can not find the printer on the wireless
network, run the Wireless Setup Wizard and then the Install Network Printer
Wizard. (To run the Wireless Setup Wizard, insert the HP Jetdirect CD into your
computer; select "Install"; select "Wireless"; select "No, the wireless settings have
not been configured . . ."; and select "Step 1 -- Configure printer's wireless
settings".)
Did running the Install Network Printer Wizard solve the problem?
If yes, you have completed the troubleshooting procedure successfully.
If no, the troubleshooting procedure has gone as far as it can go. You will need
further assistance from HP technical support. Click on No for information about
contacting HP technical support.
file:///C|/Bottlecap_Structure_26--TestMerge/DOCS/EN/280M/USER/LWTNET15.HTM [5/20/2003 3:57:45 PM]