HP Jetdirect 280m 802.11b Wireless Print Server - Manual (Page 54)

Network Basics
already installed in
the printer. If your
print server
module is not
already installed:
Unplug the
printer's power
cord. Plug the print
server into its slot
in the printer.
Connect the
network cable to
the network
connector on the
print server. Plug
in the printer's
power cord. (For
detailed
instructions, check
your print server
manual or setup
poster.)
Note: For a
wireless print
server the
connection
sequence is the
same, except that
there is no network
cable to connect.
Note: If your network
wiring is hidden -- In
many network
installations, the network
components (hubs,
switches, &c) are stored
in a wiring closet and the
network wiring is hidden
in the walls. The only sign
of a network that you see
in such an installation is a
file:///C|/Bottlecap_Structure_26--TestMerge/DOCS/EN/NETBASIC/FIP0010.HTM (3 of 4) [5/20/2003 3:45:29 PM]