HP Jetdirect 280m 802.11b Wireless Print Server - Manual (Page 168)

ENWW
HP Jetdirect Configuration Page 27
16 NOT CONFIGURED (Ethernet) The HP Jetdirect print server has not been
configured for NetWare. Use the installation software,
embedded web server, or other tools to configure the print
server for NetWare networks.
16 LAN ERROR -
AUTO REMOVAL (Token Ring) The HP Jetdirect print server detected an
internal hardware error following the Token Ring beacon
auto-removal process and has removed itself from the ring.
17 UNABLE TO FIND
SERVER (Ethernet) The HP Jetdirect print server was unable to find
the NetWare print server (Remote Printer mode) or file
server (Queue Server mode). (There was no response to
service queries for advertising print servers or file servers
that matched the configured print server or file server
name.)
Make sure that the print server or file server is running and
that the print server or file server name configured on the
HP Jetdirect print server matches the actual name used by
the print server or file server. Also make sure that all cables
and routers are functioning correctly.
17 LAN ERROR -
REMOVE RECEIVE (Token Ring) The HP Jetdirect print server has received a
Remove Adapter data frame during the Token Ring insertion
process, or has received a remove ring station data frame
request, and has removed itself from the ring.
18 PASSWORD
ERROR The HP Jetdirect print server detected that the password for
the NetWare print server object is wrong. Use a NetWare
utility (such as PCONSOLE) to erase the password for the
print server object. When the HP Jetdirect print server logs
on again, it sets a new password.
Note: When multiple file servers are configured, the error is
only displayed on the configuration page if none of the file
servers are connected.
19 NO QUEUE
ASSIGNED The HP Jetdirect print server detected that the print server
object has not been assigned any queues to service. Assign
queues to the print server object using printer installation or
NetWare utilities.
Note: When multiple file servers are configured, the error is
only displayed on the configuration page if none of the file
servers were successfully connected.
1A PRINTER NUMBER
NOT DEFINED A NetWare printer number for this printer has not been
configured. Assign a valid printer number to the HP Jetdirect
print server. Use a NetWare utility (such as PCONSOLE),
the Jetdirect embedded web server, or other tool to assign
a printer number.
Table 9.12 Error Messages (3 of 10)
Error Code and
Message Description