HP Jetdirect 280m 802.11b Wireless Print Server - Manual (Page 141)

HP Jetdirect 280m user's guide
Performing a cold reset (resetting to factory defaults)
Once you configure the HP print server, the configuration settings are retained in
memory unless you manually reset them to factory defaults.
To reset the print server configuration to factory defaults, follow these steps:
1. Make sure that the printer's power is on.
2. Unplug the print server from the printer.
3. While holding down the Test button on the print server, plug the print
server back into the printer; continue to hold down the Test button for about
five seconds. Any user-configured settings will be erased.
file:///C|/Bottlecap_Structure_26--TestMerge/DOCS/EN/280M/USER/LWTECHNQ.HTM (5 of 5) [5/20/2003 4:05:05 PM]