HP Jetdirect 280m 802.11b Wireless Print Server User Manual

Page 173

Advertising
background image

32 HP Jetdirect Configuration Page

ENWW

42 INVALID IP
ADDRESS

The IP address specified for the HP Jetdirect print server
(through BOOTP) is an invalid IP address for specifying a
single node. Check your Bootptab file for proper entries.

43 INVALID SUBNET
MASK

The IP subnet mask specified for the HP Jetdirect print
server (through BOOTP) is an invalid subnet mask. Check
your Bootptab file for proper entries.

44 INVALID GATEWAY
ADDRESS

The default gateway IP address specified for the
HP Jetdirect print server (through BOOTP) is an invalid IP
address for specifying a single node. Check your Bootptab
file for proper entries.

45 INVALID SYSLOG
ADDRESS

The syslog server IP address specified for the HP Jetdirect
print server (through BOOTP) is an invalid IP address for
specifying a single node. Check your Bootptab file for proper
entries.

46 INVALID SERVER
ADDRESS

The TFTP server IP address specified for the HP Jetdirect
print server (through BOOTP) is an invalid IP address for
specifying a single node. Check your Bootptab file for proper
entries.

47 INVALID TRAP
DEST ADDRESS

One of the SNMP trap (Trap PDU) destination IP addresses
specified for the HP Jetdirect print server (through TFTP) is
an invalid IP address for specifying a single node. Check
your TFTP configuration file.

48 CF ERR - FILE
INCOMPLETE

The TFTP configuration file contained an incomplete last
line that did not end in a newline character.

49 CF ERR - LINE TOO
LONG

A line being processed in the TFTP configuration file was
longer than the HP Jetdirect print server could accept.

4A CF ERR -
UNKNOWN
KEYWORD

A TFTP configuration file line contained an unknown
keyword.

4B CF ERR - MISSING
PARAMETER

A line in the TFTP configuration file was missing a required
parameter.

4C CF ERR - INVALID
PARAMETER

A line in the TFTP configuration file contained an invalid
value for one of the parameters on that line.

4D CF ERR - ACCESS
LIST EXCEEDED

The TFTP configuration file specified too many access list
entries using the “allow:” keyword.

4E CF ERR - TRAP
LIST EXCEEDED

The TFTP configuration file specified too many trap
destination list entries using the “trap-destination:” keyword.

4F TFTP REMOTE
ERROR

The TFTP transfer of the configuration file from the host to
the HP Jetdirect print server failed with the remote host
sending a TFTP ERROR packet to the print server.

Table 9.12

Error Messages (8 of 10)

Error Code and
Message

Description

Advertising