HP Jetdirect 280m 802.11b Wireless Print Server - Manual (Page 70)

HP Jetdirect 280m user's guide
Installation
There are two parts to installing the print server: hardware installation and
software installation. You should install the hardware first.
Hardware installation
1. Set up the printer hardware. Do not connect the printer to your
computer with a USB or parallel cable.
2. Switch on the printer's power.
3. Plug in the print server. Push it into the LIO slot on the back of the
printer until it clicks into place.
4. Print a configuration page by pushing the Test button ( icon) on
the print server. If the page does not print successfully, see the
troubleshooting section.
Software installation
file:///C|/Bottlecap_Structure_26--TestMerge/DOCS/EN/280M/USER/LWINST.HTM (1 of 5) [5/20/2003 3:49:37 PM]