HP Officejet Enterprise Color X585 Multifunction Printer series - Manual (Page 103)

Table 8-9 HP Embedded Web Server Networking tab (continued)
Menu Description
Network Settings Configure IPX/SPX, AppleTalk, DLC/LLC, and SNMP settings, depending on the print
server model.
Other Settings Configure general printing protocols and services supported by the print server. The
available options depend on the print server model, but can include firmware update,
LPD queues, USB settings, support information, and refresh rate.
AirPrint Enable, set up, or disable network printing from Apple supported products.
Select Language Change the language displayed by the HP Embedded Web Server. This page displays if
the Web pages support multiple languages. Optionally, select supported languages
through language-preference settings in the browser.
Settings View and restore current security settings to factory-default values.
Configure security settings using the Security Configuration Wizard.
NOTE: Do not use the Security Configuration Wizard to configure security settings
using network-management applications, such as HP Web Jetadmin.
Authorization Control configuration management and use of this product, including the following:
● Set or change the administrator password to control access to configuration
parameters.
● Request, install, and manage digital certificates on the HP Jetdirect print server.
● Limit host access to this product through an Access Control List (ACL) (for selected
print servers on IPv4 networks only).
Mgmt. Protocols Configure and manage security protocols for this product, including the following:
● Set the security management level for the HP Embedded Web Server, and control
traffic over HTTP and HTTPS.
● Configure the SNMP (Simple Network Management Protocol) operation. Enable or
disable the SNMP v1/v2c or SNMP v3 agents on the print server.
● Control access through protocols that may not be secure, such as printing
protocols, print services, discovery protocols, name resolution services, and
configuration-management protocols.
802.1X Authentication Configure 802.1X authentication settings on the Jetdirect print server as required for
client authentication on the network, and reset the 802.1X authentication settings to
factory-default values.
CAUTION: When changing the 802.1X authentication settings; the product might lose
its connection. To reconnect, it might be necessary to reset the print server to a factory-
default state and reinstall the product.
IPsec/Firewall View or configure a Firewall policy or an IPsec/Firewall policy (for selected HP Jetdirect
models only).
Announcement Agent Enable or disable the HP Device Announcement Agent, set the configuration server, and
configure mutual authentication using certificates.
Network Statistics Display network statistics that are collected and stored on the HP Jetdirect print server.
Protocol Info View a list of network-configuration settings on the HP Jetdirect print server for each
protocol.
Configuration Page View the HP Jetdirect configuration page, which contains status and configuration
information.
ENWW HP Embedded Web Server 93