HP Hitachi Dynamic Link Manager Software - Manual (Page 224)

4. HDLM Operation
202
Make sure that the changed default value is reflected in the value actually used.
# lsattr -El
hdisk-name
| grep reserve_policy
reserve_policy no_reserve Reserve Policy TRUE
15. Activate the volume group used by HDLM.
# varyonvg
volume-group-name
16. Mount the file system used by HDLM.
# mount
file-system-mount-point
4.5.3 Changing a Path
This subsection explains how to add and delete paths.
(1) Adding a Path (to a Volume Group Other than rootvg)
Connect the path to the system and execute the following command:
# cfgmgr
(2) Adding a Path (to a Device Included in rootvg)
The following shows an example of adding a path to
hdisk0
in an environment where
rootvg consists of
hdisk0
and
hdisk1
.
1. Connect the path to the system, and then execute the following command:
# cfgmgr
2. Check the list of current boot disks.
The following shows an example of executing the command:
# bootlist -m normal -o
hdisk0 blv=hd5
hdisk1 blv=hd5
...
3. Specify a boot disk according to the host environment to be used.
The following shows an example of executing the command: