HP Hitachi Dynamic Link Manager Software - Manual (Page 400)

8. Messages
378
aa...aa: Option definition file name
Action
Check whether another program is currently using this file (for example, the file
is being opened in a text editor), or whether the file has been inadvertently
deleted.
KAPL04009-E
The option definition is invalid.
Details
HDLM manager could not start normally because some of the definitions in the
option definition file were invalid.
Action
If the KAPL04033-W message is output after this message, execute the
dlnkmgr
view -sys -sfunc
command, and then check the option settings.
For options with setting values that have returned to default values, use the
dlnkmgr set
operation to reset the values.
If the KAPL04033-W message is not output, restart HDLM manager.
If the same error occurs, re-install HDLM.For details on the
view
operation, see
6.7 view (Displays Information). For details on the
set
operation, see 6.6 set
(Sets Up the Operating Environment).
KAPL04010-E
Could not open the error log file.
Details
HDLM manager cannot start normally (unable to open the error log file
/var/
opt/DynamicLinkManager/log/dlmmgr[1-16].log
).
Action
Check whether another program is using the file (or has opened the file with
Notepad), or whether the error log file has been deleted inadvertently.
KAPL04011-E
Could not output the error log file.
Details
The log information could not be output to the error log file
/var/
DynamicLinkManager/log/dlmmgr[1-16].log
.
Action
Make sure that the disk has enough unused capacity.